💧 Why Is Your Water Pressure Low? Common Causes & How GladPro Plumbing Services Can Help
- GladPro Plumbing Services

- Aug 20
- 3 min read
Updated: Aug 21
Is your shower more of a trickle than a torrent? Are your taps slow to fill the sink? Low water pressure is a frustrating but common plumbing issue — and it’s often a sign of something more serious beneath the surface.
At GladPro Plumbing Services, we help households across Gravesend, Kent, Essex, and South East London identify the root cause of low water pressure and get everything flowing again — fast.
In this guide, we break down the common causes of low water pressure, what your normal water pressure should be, and when it’s time to call in the pros.
💡 What Should Your Water Pressure Be?
In the UK, normal household water pressure is around 1 to 3 bar, with 1 bar being enough to push water up to 10 metres (approx. 1 floor of a house). A typical reading at your kitchen tap should deliver 10–15 litres per minute.
If your taps or shower are delivering significantly less than that — or pressure fluctuates — something’s not right.

🔎 Top 7 Reasons for Low Water Pressure in the Home
1. 🚧 Street Works or Local Supply Issues
Ongoing water mains repairs or upgrades on your street can cause a temporary drop in pressure. If all your neighbours are affected too, this could be the reason.
🛠️ Fix: Wait for the work to be completed — but if the issue persists, GladPro Plumbing Services can inspect your internal system to rule out any damage or residual blockage.
2. 🧼 Partially Closed or Faulty Valves
A slightly closed main stopcock or internal valve can limit water flow without being obvious. This often happens after routine maintenance or DIY repairs.
🛠️ Fix: We’ll inspect all accessible valves and ensure everything is open, correctly set, and free from corrosion.
3. 💧 Limescale or Debris Buildup
Hard water in areas like Gravesend, Kent, Essex and South East London causes limescale deposits, which build up inside pipes and tap outlets, restricting flow.
🛠️ Fix: We offer water softener installation to protect your plumbing long-term. Scaled pipework and fittings can be descaled or replaced prior to the water softener being installed.
4. 🔍 Hidden Plumbing Leaks
A small leak in your system can cause a big drop in pressure — especially if it’s hidden behind walls or underground.
🛠️ Fix: GladPro uses non-invasive leak detection tools to pinpoint the problem and fix it before it leads to water damage.
5. 🏚️ Old or Corroded Pipework
If your home still has galvanised pipework, corrosion could be choking your water flow from the inside out.
🛠️ Fix: We’ll replace corroded sections with modern pipework that restores pressure and improves water quality.
6. ⚙️ Faulty Pressure Regulator (PRV)
Some homes have a pressure reducing valve (PRV) installed to prevent excessive pressure. If it’s stuck or broken, your pressure could be too low.
🛠️ Fix: We’ll inspect your PRV and either adjust or replace it to get your system working properly again.
7. 🚿 Shared Water Supply or Peak Time Usage
If your property shares a supply with neighbouring homes (common in older terraced housing), pressure may drop when everyone’s using water at once.
🛠️ Fix:We can assess your system and recommend booster pumps or independent supply upgrades if needed.
🛠️ How GladPro Plumbing Services Can Help
At GladPro Plumbing Services, we don’t guess — we diagnose. Our team will:
✅ Inspect and test your entire plumbing system
✅ Identify the exact cause of low pressure
✅ Offer clear, affordable repair options
✅ Provide permanent solutions — not temporary fixes
We’re trusted by homeowners throughout Gravesend, Kent, Essex, and South East London to restore full water pressure quickly and professionally.
📞 Don’t Put Up With Poor Water Pressure
Low pressure is more than annoying — it could be a sign of something serious. Let us sort it before it becomes costly.
📍 Serving homes across Gravesend, Kent, Essex & South East London
📞 Call now on 07375702735
✅ Fast. Local. Reliable. That’s the GladPro promise.
_edited.jpg)




Comments